| Project | Content | Capabibty |
|
1 |
board classification | Aluminum Base,Copper Base,ceramics base copper,Combined Bade Board |
|
2 |
material | Domestic Aluminum.Domestic copper,Imported aluminum, Imported copper |
|
3 |
surface treatment | HASL/ENIG/OSP/sikering |
|
4 |
layer account | single-sided pnnted board/double-sided printed board |
|
5 |
maxi.Board Size | 1200mm*480m(n |
|
6 |
min.Board Size | 5mm*5mm |
|
7 |
line width/apsce | 0.1mnV0.1mm |
|
8 |
warp and twist | <=0.5%(tfiickness:1 .Omm,Board Size:300mm*300mm) |
|
9 |
board thickness | 0.5mm-5.0mm |
|
10 |
copper foil thickness | 35urrV70um/105um/140um/175unV210um/245um/280um/315um/35Qjm |
|
11 |
tolerance | CNC routing： ±0.1 mm;punch: 士 0.1 mm |
|
12 |
V-CUT registration | ± 0.1mm |
|
13 |
Hole wall copper thickness | 20um-35um |
|
14 |
Mm registration of hole position (campare with CAD data) | ± 3mil( 10.076mm) |
|
15 |
Min.punching hole | 1.0mm(Board thickness bebw1.0mmr 1.0mm) |
|
16 |
Min.punching square slot | (Board thickness below 1 .Omm, 1.0mm* 1 .Omm) |
|
17 |
Registration of printed circuit | ± 0.076mm |
|
18 |
Min.drill hole diameter | 0.6mm |
|
19 |
thickness of surface treatment | plating gold:Ni 4um-6um>Au0.1um-0.5umENIG:Ni 5um-6um,Au:0.0254um-0.127umsilvering:Ag3um-8umHASL:40um-1 OOum |
|
20 |
V-CUTdegree tolerance | (Degree) |
|
21 |
V-CUT board thickness | 0.6mm-4.0mm |
|
22 |
Min.legend width | 0.15mm |
|
23 |
Min.Soldor mask opening | 0.35mm |